The home decor and architectural design market is booming.
From the trendy DIY decor and decorating trend to the trendy custom building materials market, the market is exploding.
But what if you could make the entire house a miniaturization of its components?
This is what’s called a DIY furniture cabinet.
The idea is to build the whole house as a furniture cabinet, which can be stacked up to 30 feet high.
In fact, a DIY home is almost always a furniture box, as you can see from the DIY furniture gallery on Pinterest.
Here are the basic components to building your own DIY furniture box.
Here’s a breakdown of what you’ll need:1) An aluminum frame, like the one pictured.
I prefer to use 3/4″ plywood, as it’s much more sturdy and easier to cut through.2) A table saw or circular saw.
3/8″ or 1/4″, both are perfect for cutting through a small section of plywood or aluminum.4) A drill and tap.
I have a drill and a drill bit on hand, but you can also buy a drill that has a drill press attachment.
If you’re not familiar with a drill, it can be found at hardware stores and online.
A table washer will also work.5) A hand-held drill and screwdriver.6) A 2×4 (or a similar) piece of plyboard.
For this project, I used 1″ ply, as a template.
You can find this type of ply available from many local hardware stores.7) A 1/2″ thick 1/8″-thick plywood.8) A large piece of 1/6″ ply (this is about 1/16″ thick) that is 3/16-thick.
The ply should be about the size of the frame.
If it’s not, it’s too thin.
If the ply is too thin, you may need to cut a notch to fit in the ply.9) A 6-pack of 4-inch screws.
I used two of each type.10) An eyelet screwdriver and a screwdriver set.
You could use an eyelet tool, but I prefer using the 6-inch hex-head screwdriver as it makes for a much easier and safer installation.
You should also buy eyelets that are the same size as the eyelet screws.11) A piece of PVC pipe.
You will need about 2 inches of this piece of pipe.12) A few wire ties.
A wire tie is a special type of screwdriver with a screw head that is inserted into the end of a plastic rod.
You’ll also need some kind of clip for attaching the wire tie to the screw head.13) Some sort of glue.
You may want to use a liquid-based adhesive like Vaseline, or a thin film of Vaseline on the surface of the plastic.14) A small amount of glue (optional).15) A nail gun or a small nail gun brush.16) A screwdriver bit.
You don’t have to have a bit, but if you do, you can attach it to the end.
The glue will help secure the screwdriver to the plastic as it cuts through the plastic (which is easier to handle).17) Some paper towels to wipe the glue off.18) A box cutter.
If your DIY furniture is large enough, you could cut out a hole in the bottom of the plywood frame, and then attach the cutting board to it with a small box cutter or similar tool.19) A flathead screw driver.20) Some nails or screws.21) A pair of pliers.22) A file or a sharpie.23) A light, thin file or scissors.24) A pencil or eraser.25) A ruler.
The easiest way to do this is to use your finger, as if you were holding a pencil.26) A glass scraper.27) A paintbrush or a brush.
I don’t use paint, but some people like to use it to clean up their nails and paint on furniture.
You want a medium-dark color for your paint, so a dark color will work.28) Some adhesive tape.
It may also be necessary to tape a small piece of cardboard or a piece of Styrofoam over the edge of the front of the box cutter to make sure it’s firmly attached to the cutting piece.
Here is a video showing how I build a DIY chair.
The instructions are on the DIY house and building website.
It also has instructions on building a home from scratch, so it should be easy to follow.